EZABL Kit – Add Auto Bed Leveling to Virtually Any Printer!


The EZABL Kit is a fully original design that makes adding an Auto Bed Leveling Sensor to your printer much easier than DIY solutions.

There are 2 verisons available. The Direct Wire and EZ-Connect.

There is a 1-3 day lead time on this item. Meaning it MIGHT take up to 3 business days to ship as they are made to order in house. Due to the high demand this item goes out of stock quick. The next batch is due in 2-3 weeks from now. You can sign up for in stock notifications on the product pages for each kit version.

You will receive a full kit that includes:

  • Power Adapter (US Plug, 110-220V) (EZ-Connect Version) OR 3FT of Wire (Direct Version)
  • Sensor with 1 Meter Cable
  • Our Original EZABL module
  • Printed Case for the EZABL module – Color is Black, Silver, or White, depends on stock
  • Full documentation on getting it up and running (Provided in a PDF Format) – Password is emailed to you after your order is processed.

There is also FREE email support included to help you get going and printing with a leveled bed

Extensive firmware setup assistance – phone, messenger, or video chat – is available but there is a charge for this due to the involvement required. Meaning if you want to add ABL and aren’t familiar with your board/printer firmware I can assist you with this.

This kit has been in development for 6 months and has been proven to be accurate and reliable. It works on Glass, Aluminum, Steel, BuildTak, and many other solid surfaces.

If you have any inquiries feel free to Contact Me!

Full details here: https://www.timothyhoogland.com/ezabl-kit/

Anycubic Kossel Pulley Delta Review – Sponsored by GearBest.com

This is the review of the AnyCubic Kossel Delta Printer (Pulley Version).

This was provided by GearBest for review and this is my honest opinion.

The bottom line is it’s a nice kit and has a lot of potential and printed very well out of the box. I have a lot of upgrade in store for it so stay tuned!

Purchase the printer here.

Use code “K3DP” for a price of $175.99 – only 60 uses available.


Join my official Chinese 3D printer support group here:

If you want to support my channel use the affiliate links to shop at your favorite stores or buy upgrades and accessories from my store:
TDH Store: https://www.timothyhoogland.com/shop/
Amazon: http://amzn.to/2lvBwPI

Or sponsor me on Patreon: https://www.patreon.com/houseofbugs

Due to the overwhelming amount of questions and message I receive I will not be answering general questions (like requests for ALL the links to the STL files that were used on my build). This is not me being mean but there is too much to list. If you have a specific question then go right ahead and ask!

Online Resources:

Links here may be affiliate links and they do NOT cost you extra to use. Please use them when you can since it helps me fund making videos by earning referral fees. I will not link products of a higher price just to make more referral fees. Products linked are ones that I have personally purchased and used in my builds.

[TTT] Getting started with 3D Printing with the Anet A8 Printer – Overdue Update

A few months ago I posted 2 articles (Post 1 & Post 2) about upgrades to do to the Anet A8 printer. I planned on writing more guides in addition to the 2 mentioned but I quickly found that there was just too much to cover in regards to this printer. I was constantly making changes here and there to the printer so it was hard to keep up.

The bottom line is that the first 2 articles I posted are really all that you need to get good prints and make the printer reliable. Anything further than that you will be customizing the printer for a specific need that you have or want. As I write this followup my printer only has 2 things that are factory left on it; the heated bed PCB and the frame. I have replaced and upgraded every other part on the printer and even added dual color support through the single hotend. The guides were meant to get you started with the printer and to make it safer, these 2 posts did just that.

That is really all that I needed to say on the matter. There will be no other posts as I feel the ones already published cover the goal of the articles and anything further would not be applicable to everyone as people have different demands and needs for their individual printer.

If you need help and/or have questions please check out the Official Anet A8 Printer group here: https://www.facebook.com/groups/OFFICIALAnet3DprinterSupportGroup. I help run this group now with a few other people and it is a great place to get help with your A8 or similar printers.

I will also be attending MidWest Rep Rap Fest so let me know if you will be there as well!

Social Media Island – Account Lockouts & Freedom of Speech

A few weeks ago I went to use my SnapChat account and found that it was not logged in anymore. No big deal right? I went to log back in and the account is now magically disabled. I went through the account unlock process and it still will not let me log in. I said forget it and just uninstalled the application and moved on with my life.

Today my Facebook account was put in a locked state after I was posting a link to some firmware for the Anet A8 printer in a Facebook group that I help run. I try to submit the account verification with my ID and their page that is used to submit this information is broken.

That leads me to this post. What do you do when a platform that you use to communicate and network with friends locks you out without being able to re-instate the account? With regards to Facebook you post pictures and create memories for your friends and family. I also use Facebook to share posts from this website on the page for it as well. I have multiple people that I exclusively talk to through Facebook Messenger and I realized that I do not have any other way to contact them.

It has made me realize that you shouldn’t centralize your communications through one platform, especially Facebook. I have no way to contact these people that I talk to daily or a way to share these posts on the page for this website since the account is disabled. All my photos and posts are gone. All the guides and help that I have posted in the Anet printer groups are gone. Hours upon hours of work and months of memories are gone because their system decided to flag my account. I really wish I could completely get rid of Facebook but a lot of my friends refuse to switch to Signal which is one of the few platforms that I actually trust.

In addition to this for all I know is that my account could have been reported for saying something that “offended” someone else. Facebook has implemented rules in their TOS that forbid “hate speech” which is nothing that is set in stone and completely based emotional parameters. I completely blew away my profile in late 2016 after all the fallout from the last election. I now have to sensor myself as a conservative person with what I post because I know that if something gets reported enough for being “Offensive” then my account will be removed. There is no free speech on Facebook for conservatives, only if you are a liberal can you actually speak your mind without worrying about being censored. This is WRONG but what Facebook has devolved into.

Just think twice about hitting that “Sign in with Facebook” button when registering with a website. I stopped doing this after my account was flagged in January this year and was inaccessible for over 4 days. Make sure you have multiple ways to contact the people you talk with because like me I am completely cut off from almost a dozen people that I talk to on a daily basis. I will be making another account just to have separate for my site postings in case this happens again.

In all honesty if they outright delete the account and it is not able to be used anymore I will not be making a personal account again with them, business only for sharing posts from this website.