• Version
  • 35 Download
  • 4.49 MB File Size
  • April 25, 2017 Create Date

This slideshow requires JavaScript.

This is the adapter plates that I made to use a standard 8mm threaded rod setup with your stock CR-10 spool holder. I have included the quick change spool adapter and 8mm rod clips that I use in the download ZIP. You will need 5-6" of 8mm (5/16") threaded rod and 2 nuts to do this. A nut goes on each side of the adapter plates to secure it to the holder. It is very solid.

You can use the included quick change spool holder with OR without bearings. It works well with both. I drill mine out after printing to give it some wiggle room on the threaded rod.

Print in ABS or PETG with 50% infill. If you only have PLA print with a high infill (75% or more).

Enjoy!

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.